Ive been seeing that alot of peole have been trying to get Pandoras battery to work but they are having trouble, so this is a little guide to help.

First I would like to thank the Noobz team and Team C+D for making this possible. All credit goes to them.

Requirements:
1. A hombrew enabled PSP (if your psp cant run homebrew it will not work)
2. The files you can get it from "HERE"
3. A memory stick Produo ( a 32mb non produo will not work)
4. A an extra battery not necessry but it is good to have one.

First you have to format your memstick with any tool. I use windows to format mines. So go to your psp drive letter and right click it and choose format. Then click start to start format. I dont know if its necessary but the readme states it so I do it.

Now it is time to run mspformat. The best way to run this is to make a .bat file. Open up a note or worpad and type in "mspformat X" ( replace X with the your psp drive letter.Then save the file as format.bat and place it where the mspformat.exe is. Now hook up your psp to your PC and double click the .bat that you just made. A dos window will pop up and ask you if you want to proceed. Type "Y" to and hit enter. It will take some time depending on the size of your memstick.

It should look like this.

After you are all done formatting, it is time to start putting files in the memstick. Extract the download that you downloaded if you have not done it already. Then go to your psp and make a folder called PSP. then inside of the PSP folder make a folder called GAME. After you are done go back to the download folder and open up the folder called "install" and take the 2 folder you see there and put it in the GAME folder you created. Then go to the folder called "battery" and take the 2 folders in there and put it in the GAME folder as well.

So your memstick should look like this.

X:\PSP\GAME\pbfirm_install pbfirm_install% and pandora_battery pandora_battery%

Now you must get the 1.5 EBOOT from "HERE". Unzip it and rename the EBOOT.PBP to UPDATE.PBP. THEN stick it in the root of your memstick. Then remove your memstick and put it back in.

After you got that done go to your xmb menu and run the Pandora installer. It should make all the files that it required including the msipl you will use to make the memstick bootable.

Ok after the installer has finish making all of the required files, it is time to run msinst.exe. Go back in to your psp and take the file msipl.bin that the installer created in your memstick and place it in the same folder as msinst.exe.. Open up notepad/word pad and type in msinst X msipl.bin(repace X with your psp driveletter). Then save it as msinst.bat and put it in the same folder as msinst.exe. Once done connect your psp to your PC and double click the .bat file you have made and a dos window will pop up and ask you to proceed. Type "Y" and hit enter.

It should look like this.

Now that you have all the files and are ready to make your battery. Go into your psp xmb and run Padora battery creator. When the screen finish loading it will give you some option like to create battery or return to normal and backup eeprom. I suggest you backup your eeprom just incase. After you have backup you eeprom, then run the creator program again and just press X on your psp and you are done!

NOTE: When starting up the battery make sure you dont have the AC charger plugged in.

If all goes well.
CONGRATS NOW YOU HAVE AN UNBRICKER BATTERY.

The Wii’s Twilight Hack has been a big hit for the homebrew crowd. Using the software flaw, they’ve been able to play Tetris on their Wiis and even create some custom Wii channels. Nintendo tried to shut that program down, but 8 hours later, it was back. Nobody can keep the homebrew devs down, and over the past week there have been two more major breakthroughs in “hacking the Wii.”

A group called Waninkoko has created a custom firmware for the Wii which allows writable DVDs to be read by the system. This means that downloading Wii titles to your PC, and then playing them on a burned disc could be right around the corner. The second crack for the Wii came from teamshift. They were able to create a PSP emulator that can play whatever games you wish.

Of course, neither of these hacks have actually been confirmed, so take heed before you try to install the Waninkoko hack. Do so at your own risk. The PSP emulator rumor from teamshift comes from a single image posted on NintendoMax showing Puzzle Bobble Pocket playing on a Wii. The image doesn’t hold much credence, and could be completely fake, but if it’s real then PSP games may become the new black for a while in Wii owner’s homes.

As more information is revealed on this, we’ll let you know.

Read more at engadget and DCEMUuk

 Sorry about the PSP Blender blog visitors who have been waiting on an update. We have been busy on a sister site of ours.

http://www.thegameforum.com

You can visit their PSP section here:

http://www.thegameforum.com/sony-psp/

You may want to check it out for all of the latest PSP downloads, and PSP hacking news. PSP Blender members receive special access to a PSP downloads forum. Simply send you receipt number and PSP Blender username to The Game Forum. Contact info can be found on their website.

Intro:

Lots of questions pop up in these forums lately on how to install Despertar del Cementerio v3 (DCv3).
Numerous threads on the matter are created, because the newbies can’t find their answers.

This is not a complete howto, but should get people in the right direction.
And if they do have any questions, they can ask here instead of starting a new thread.

What is DCv3 ?

DCv3 is a powerfull tool created by the greatest devs in the psp scene. It is an evolved version of the Pandora’s Battery. Pandora was first created to unbrick psp’s. However Pandora wasn’t compatible with the psp slim. Therefore DC was coded. The latest version (v3) has full compatibility with classic and slim psp’s.

DCv3 allows you to:
- Write custom fw M33 3.71-2 to ANY model psp (regardless of fw version) to date
- Write official fw 3.71 to ANY model psp (regardless of fw version) to date
- Create a nand dump from the psp (the nand holds the fw on the psp)
- Write a nand dump to the psp.

NOTE: DO NOT USE A DUMP FROM ANOTHER PSP. IT WILL DESTROY THE IDSTORAGE. THERE’S NO WAY OF REGENERATING THE IDSTORAGE. THE ONLY WAY OF RECOVERING THE IDSTORAGE IS FROM A NAND DUMP FROM YOUR OWN PSP. THEREFORE ALWAYS MAKE A NAND DUMP BEFORE YOU DO ANYTHING WITH DCv3 !

To let the memstick do it’s magic you’ll need a battery which will put the psp in ’service mode’. There’s several options how to obtain such a battery.

1) Create it with a homebrew capable psp. That’s a psp running cfw or official 1.50 fw.
2) Create it by hard modding a battery. This is not for beginners, it is potentially dangerous as you are opening your battery.
3) Buy a battery from the internet. Your on your own on this one, as I do not promote the financial exploitation of psp devs.

Once you have the battery all you need now are the correct files on the memstick. Once again there are several ways of putting them on.

1) Create the stick using a homebrew capable psp.
2) Create the stick without a homebrew capable psp.

That’s all the options we have. Now you know what DCv3 is, where it came from and how you can get it.
I’ll put all the needed downloads and information below here in links and attachments.

Downloads:

If you do not have access to a homebrew capable psp use the folowing files:

- Memstick Easy Installer Run it by clicking Start.exe follow the prompt and choose Option 4.

- Hard modding your battery This will tell you exactly how and which chip to alter.

- Free service Go here and let someone near you create you a DCv3 kit.

If you have access to a homebrew capable psp (slim or classic) use the following files:

- To create the DCv3 yourself you need the 1.50 eboot, the 3.40 eboot and the 3.71 eboot. Also use the DCv3 attachment.

- To create the battery use one of the two tools. Slim users and classic psp with M33 3.71 without 1.50 kernel use the 3.xx tool.
Both tools will also allow you to convert your battery back to normal.

That should get all of you started. I know it’s not complete. For usage of DCv3, check the readme included.
If you still have questions on DCv3, post them here please !!

Some reminders:
MAKE A NAND DUMP !!
DO NOT USE A NAND DUMP FROM ANOTHER PSP !!
USE DCv3 WISELY !!
WHEN IN DOUBT…DON’T !!

Sony reveals new details for BD-Live Interactivity.

Watch this video demo for the PSP Skype

http://www.gametrailers.com/player/29451.html

Lets get one thing straight first: you cannot directly install any custom firmware on the official SONY firmwares higher than 1.50. This means that you have to downgrade your PSP to 1.50 before you can run any of the installation programs. For certain firmware versions below 3.03, you can directly use a glitch in GTA: Liberty City Stories to downgrade. However for firmwares above 3.03, there is no such way. Instead you have to use something called Pandora’s Battery. This is a modified PSP battery that allows you to boot any code on any PSP, including the programs that will downgrade your PSP. The process is quite long and complicated, so I will not be writing a guide on this blog. However there are many good ones that come up from a simple Google search.

• QJ.Net Tutorial
• MaxConsole Tutorial (with screenshots)
• IRShell Tutorial

You don’t have a friend with a PSP? Well, all hope is not lost. There is a way to physically modify the battery and make it act as a Pandora’s Battery. However it requires you to crack open the battery, and place a pin between two connectors. Some guides that describe this process are here:

• How to create a Pandora’s Battery and Slim MS without a Fat PSP (with Pictures)
• GUIDE:HOW TO MAKE A PANDORAS BATTERY WITHOUT A PSP WITH CFW

Stuff magazine is running a rumor item on the possibility of an upcoming Aibo, the robotic dog, working with the Playstation Portable and Playstation 3. The rumor goes that the Sony Aibo PS, as they call it, is being resuscitated by Sony’s Playstation division in an attempt to "bolster the PS3’s arsenal."

The Aibo PS will appear with its own avatar within Home and react in the real world as he does in the PS3’s upcoming interactive environment, according to the article. The rumor article goes on to say that you will be able to download new personalities for the dog from the Playstation Network and that the dog will be fully controllable using a PSP via WiFi. The dog’s head camera will send a real world vid feed to the PSP’s screen as well. The Dpad will control walking movement and the four main buttons will deal with head movement, which seems odd.

The Stuff folks rate this rumor as having a 53 percent probability. Seems like a cool concept, but I wonder if there’s the market for it to hit the real world. Who am I kidding? A remote control dog that can send live video from its head, sign me up for a baker’s dozen.

Hackers have figured out a way to make the PSP and PS3 version of Manhunt 2 from Rockstar be uncensored meaning that the game has been brought back to its original Adults Only rating state.

Hackers seem to do some amazing things and this is a perfect example of that. Manhunt 2 was originally given an Adults Only rating by the ESRB in North America, which kept it from releasing in July on the PSP, PS2, and Nintendo Wii platforms.

Rockstar had to go back to the drawing board and re-work the game to the point where they had to dumd down the violence a bit so that they were allowed to release it. They did so an yesterday on Halloween the game launched finally on the PSP, PS2, and Wii.

Now hackers have apparently found a way to remove all of the censoring by Rockstar. This reverts Manhunt 2 back to its state as an Adults Only game which will please many gamers who were not happy that the game was dumbed down a bit.